View 19-217-Y5C-AQ2R2-3T_213835.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 0603 Package Chip LED(0.4mm Height)
19-217/Y5C-AQ2R2/3T
Features
Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free The product itself will remain with in RoHS compliant Version.
Descriptions
The 19-217 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc.
Applications
Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use.
Device Selection Guide
Part No. 19-217/Y5C-AQ2R2/3T Chip Material AlGaInP Emitted Color Brilliant Yellow Resin Color Water Clear
Everlight Electronics Co., Ltd. Device No:SZDSE-197-Y13
http://www.everlight.com Prepared date:14-Aug-2007
Rev 1
Page: 1 of 10
Prepared by:Zhouhua
Revision
:1
Release Date:2008-09-20 00:16:11.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/Y5C-AQ2R2/3T
Package Outline Dimensions
Note: The tolerances unless mentioned is 0.1mm, Unit = mm
Revision
Everlight Electronics Co., Ltd. Device No:SZDSE-197-Y13
:1
http://www.everlight.com Prepared date:14-Aug-2007
Release Date:2008-09-20 00:16:11.0
Prepared by:Zhouhua
Rev 1
Page: 2 of 10
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/Y5C-AQ2R2/3T
Absolute Maximum Ratings (Ta=25
Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol
)
Rating 5 25 60 60 2000 -40 ~ +85 -40 ~ +90 Reflow Soldering : 260 Hand Soldering : 350 for 10 sec. for 3 sec. Unit V mA mA mW V
Electro-Optical Characteristics (Ta=25
Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current VF IR 2 Symbol Iv
1/2
)
Typ. ----120 591 ----15 2.0 ----Max. 180 --------594.5 ----2.4 10 Unit mcd deg nm IF=20mA nm nm V A VR=5V Condition
Min. 90.0 --------585.5 ----1.7 -----
p
d
Notes:
1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm
Revision
Everlight Electronics Co., Ltd. Device No:SZDSE-197-Y13
:1
http://www.everlight.com Prepared date:14-Aug-2007
Release Date:2008-09-20 00:16:11.0
Prepared by:Zhouhua
Rev 1
Page: 3 of 10
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/Y5C-AQ2R2/3T
Bin Range Of Dom. Wavelength
Group A Bin D3 D4 D5 Min 585.5 588.5 591.5 Max 588.5 591.5 594.5 nm IF=20mA Unit Condition
Bin Range Of Luminous Intensity
Bin Q2 R1 R2 Min 90.0 112 140 Max 112 140 180 mcd IF=20mA Unit Condition
Notes:
1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm
Revision
Everlight Electronics Co., Ltd. Device No:SZDSE-197-Y13
:1
http://www.everlight.com Prepared date:14-Aug-2007
Release Date:2008-09-20 00:16:11.0
Prepared by:Zhouhua
Rev 1
Page: 4 of 10
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/Y5C-AQ2R2/3T
Typical Electro-Optical Characteristics Curves
Revision
Everlight Electronics Co., Ltd. Device No:SZDSE-197-Y13
:1
http://www.everlight.com Prepared date:14-Aug-2007
Release Date:2008-09-20 00:16:11.0
Prepared by:Zhouhua
Rev 1
Page: 5 of 10
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/Y5C-AQ2R2/3T
Label explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
RoHS
Reel Dimensions
Note: The tolerances unless mentioned is 0.1mm, Unit = mm
Revision
Everlight Electronics Co., Ltd. Device No:SZDSE-197-Y13
:1
http://www.everlight.com Prepared date:14-Aug-2007
Release Date:2008-09-20 00:16:11.0
Prepared by:Zhouhua
Rev 1
Page: 6 of 10
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/Y5C-AQ2R2/3T
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned is 0.1mm, Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Revision
Everlight Electronics Co., Ltd. Device No:SZDSE-197-Y13
:1
http://www.everlight.com Prepared date:14-Aug-2007
Release Date:2008-09-20 00:16:11.0
Prepared by:Zhouhua
Rev 1
Page: 7 of 10
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/Y5C-AQ2R2/3T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level 90% LTPD 10%
No. 1
Items Reflow Soldering
Test Condition 5 Temp. : 260 Min. 5sec. 15min H : +100 5 min 15min L : -40 5min H : +100 10 sec 5min L : -10 Temp. : 100 Temp. : -40 IF = 20 mA 85 / 85% RH
Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS.
Ac/Re 0/1
2
Temperature Cycle
22 PCS.
0/1
3
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
300 Cycles
22 PCS.
0/1
4 5 6 7
1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS. 22 PCS. 22 PCS. 22 PCS.
0/1 0/1 0/1 0/1
Revision
Everlight Electronics Co., Ltd. Device No:SZDSE-197-Y13
:1
http://www.everlight.com Prepared date:14-Aug-2007
Release Date:2008-09-20 00:16:11.0
Prepared by:Zhouhua
Rev 1
Page: 8 of 10
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/Y5C-AQ2R2/3T
Precautions For Use
1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. or less and 60% RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30
If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60 5 3. Soldering Condition 3.1 Pb-free solder temperature profile for 24 hours.
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Revision
Everlight Electronics Co., Ltd. Device No:SZDSE-197-Y13
:1
http://www.everlight.com Prepared date:14-Aug-2007
Release Date:2008-09-20 00:16:11.0
Prepared by:Zhouhua
Rev 1
Page: 9 of 10
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/Y5C-AQ2R2/3T
4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Revision
Everlight Electronics Co., Ltd. Device No:SZDSE-197-Y13
:1
http://www.everlight.com Prepared date:14-Aug-2007
Release Date:2008-09-20 00:16:11.0
Prepared by:Zhouhua
Rev 1
Page: 10 of 10
LifecyclePhase:
Expired Period: Forever

▲Up To Search▲

Price & Availability of 19-217-Y5C-AQ2R2-3T

	To Download 19-217-Y5C-AQ2R2-3T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .